Exhibition

The printer can not automatically re-break the fault solution



Most of the failures are caused by the printer being unusable for a long period of time or for other reasons, causing the ink delivery system to be obstructed or the nozzles to be blocked. If the nozzle is not very clogged, then perform the cleaning operation directly on the printer. If there is still no effect after multiple cleanings, you can remove the ink cartridge (for non-integrated printer nozzles, you need to take off the nozzle, but need to be careful), soak the nozzle in warm water for a while, be careful not to put the circuit board Some of them are also immersed in water, otherwise the consequences can be disastrous. Use absorbent paper to remove the dripping water droplets, and then clean the nozzle several times.