Shanking Head Heat Press Machine

Shanking Head Heat Press Machine
Description: The machine can transfer the print of colorful patterns and characters which are of sublimation or solvent ink to the products made of cotton, hemp, fiber material. it is very suitable for the sublimation transfer printing on the T-shirts, mouse pads, pillows, metal photos, tiles...
Chat Now
Product Details

Description:

The machine can transfer the print of colorful patterns and characters which are of sublimation or solvent ink to the products made of cotton, hemp, fiber material. it is very suitable for the sublimation transfer printing on the T-shirts, mouse pads, pillows, metal photos, tiles and so on. It is very economical and practical, has a very high work efficiency! It will be your best choice!

Features:

1. The heat pipe and the heat board integrate into a whole one, so that the thermal conductivity is very strong, therefore the heat on the heat board can spread even.

2. The motherboard is plated with titanium, so that it can prevent the mucosity effectively.

3. By adopting the PID electronic digit constant temperature control system, the temperature accuracy reaches a very high level, the temperature readout can reach ±1-2 degrees centigrade.

4. Due to the usage of digital display for the time, the time accuracy is very high, the signal will be denoted automatically when the set time runs out.

5. By adopting the special precise winding tube technique on the heat board, the heat can spread even.

6. The special design head-shaking makes the machine have a very high flexibility.

7. It is very suitable for the small and medium enterprise.

8. The thickened heat board can avoid the uneven heat on the board.

9. The pressure can be adjusted conveniently so as to meet the requirements of the customers.

Specification:

Place of Origin: China

Voltage: 110/220V

Power: 1800/2000/2200W

Pressure: 8kg/c square

Temperature Range: Room temperature-399

Display Timer Range: 0-200S

Printing Area: 380*380 / 400*500 / 400*600mm

Packing Size: 770*490*530mm

Weight(KG): 38Kg

Operation Procedures:

Taking the white cotton cloth as an example 
A. Mirror print your picture on light sublimation paper with normal ink 
B. Hold up the press handle, open the heat board 
C. Instruction light will be on 
D. Switch power on 
E. Adjust the temperature controller on the left side.(The three buttons indicate ones place, tens place, hundreds place from left to right side),press + or – to adjust appropriate heating temperature-180°C, time needed approx. 10 minutes to reach 180°C;(Heating temperatures depends on materials, please request for the standard temperature information) 
F. Adjust time controller on the right to the appropriate heating time 30 seconds(The heating time depends on the materials) 
G. The machine will keep the constant temperature status when reaching the setting temperature 
H. Put the cloth on the silica gel board holder, put the picture facing the cloth for heat transferring,press down the heat board and the timer counts automatically. Note:Too heavy pressure may cause the handle transformed. Must adjust the pressure ahead of operation. 
I. While time up,the buzzer warns automatically. Swift the power off, hold up the press handle,take out the cloth and tear out the picture paper right away

Taking the black cotton cloth as an example: 
A. Print your picture on dark sublimation printing paper with normal ink 
B. Hold up the press handle, open the heat board 
C. Instruction light will be on 
D. Switch power on 
E. Adjust the temperature controller on the left side to adjust appropriate heating temperature-180°C, time needed approx. 8 minutes to reach 180°C 

For metal material board, the heating temperature should be approx. 170-200°C,the heating time around 60 seconds;For ceramic board, the heating temperature should be approx. 200-220°C,the heating time around 60 seconds; For the fabric, the heating temperature should be approx. 120-140°C,the heating time around 5-10 seconds. Please take the below information for example:

                    Thermal Sublimation Printing Time and Temperature

Article

Printing Material

Temperature

Time

(second)

Remark

1.Ceramic

Sublimation ink, normal photo print paper (or sublimation paper)

220

60

1. Mirror print the picture

2. Count the time when reach constant temperature

3. Stick the picture on the ceramic properly

4. Put the ceramic on the holder horizontally

5. Adjust low pressure to avoid broken of the ceramic

2. Pearl Metal Board

Sublimation ink, normal photo print paper (or sublimation paper)

180

60

1. Mirror print the picture

2. Count the time when reach constant temperature

3. The temperature should not be too high

4. Tear away the film on the cover before heat transferring and then put the pearl metal board on the holder horizontally

5. Adjust high pressure

3. Metal Catch Lock

Sublimation ink, normal photo print paper (or sublimation paper)

180

60

1. Mirror print the picture

2. Count the time when reach constant temperature

3. Stick the picture on it as close as you can

4. Tear away the film on the cover before heat transferring

5. Adjust high pressure

4. Half Cotton Light Color T-shirt

Sublimation ink, normal photo print paper (or sublimation paper)

180-190

120-130

1. Mirror print the picture

2. Count the time when reach constant temperature

3. Only for light color, half cotton T-shirt

4. High pressure

5. Half Cotton Dark Color T-shirt

Sublimation ink, normal photo print paper (or sublimation paper)

180-190

120-130

1. Print the picture

2. Count the time when reach constant temperature

3. Only for dark color, half cotton T-shirt

4. High pressure

6. Pure Cotton Light Color T-shirt

Sublimation paper, normal ink

180-190

30

1. Mirror print the picture

2. Count the time when reach constant temperature

3. Only for pure cotton Light Color T-shirt

4. High pressure

7. Pure Cotton Dark Color T-shirt

Sublimation paper, normal ink

180-190

30

1. Print the picture

2. Count the time when reach constant temperature

3. Only for pure cotton Dark Color T-shirt

4. High pressure

8. Shell Necklace Ring

Sublimation ink, normal photo print paper (or sublimation paper)

180

60

1. Mirror print the picture

2. Count the time when reach constant temperature

3. Stick the picture on it as close as you can

4. High pressure

9.Imitative Ceramic Necklace Ring

Sublimation ink, normal photo print paper (or sublimation paper)

180

60

1. Mirror print the picture

2. Count the time when reach constant temperature

3. Stick the picture it as close as you can

4. High pressure

 

Accessories

(1)The Printer. Choose any normal Ink Jet photo printer and Epson series printer is recommended. 
(2)To achieve the best quality of the photo printing, the following printer setting for your reference: 
a.Choose the “Best Photo” and the “Photo Quality Ink Jet Paper” under “Main” as shown in figure 1. 
b.Click “Advanced” under “Main” to achieve more setting as shown in figure 2. 
c.Choose “Mirror Image” under “ Page Layout” as shown in figure 3 while printing photo for ceramic board and metal board, shell board and imitative ceramic necklace etc.(3)The sublimation ink. Make sure to pull out the color soft plug on the top of the ink cartridges before putting them into the printer. The sublimation ink is easy to dry and better to furnish with one printer until the ink use up. 

(4)Ink and printer maintenance. 
a.Choose “ Maintenance” under the “Property” of the printer to make maintenance for the printer as shown in figure 4.

Warranty and Maintenance:

1,One-year guarantee. 
2,Pressure: Adjust pressure screw clockwise to increase the pressure, counter clockwise to decrease the pressure 
3,Time: Check and adjust the position of the jiggle switch in the rear machine case if the buzzer not warn or keep warning when time is out. 
4,If press the pressure handle,the handle would be spring back automatically, please adjust the adjusting screw downward. After finished the printing, the handle may be too heavy to hold up, please adjust the adjusting screw upward.

Notice: 
1. The machine must be connected with the ground wire! 
2. Do not touch the heat board while heating! 
3. Do not touch the heat board once finish working as time is needed to cool down. 
4. Please keep children away from the machine! 
5. Please use the heat insulation glove to pick the finished goods!


Hot Tags: shanking head heat press machine, China, suppliers, factory, price, for sale, made in China
Feedback